机械英语翻译

❶ 机械英文翻译

1、需要控制的领域
2、JEMPRA和淬火硬度HRC 52-56
3、直滚花1.25步
浦诺菲滚花：0.5
4、平壁轴

那个单词不会，呵呵只会这么多了，希望对你有帮助，采纳答案哦

❷ 翻译“机械的”（英语）

机械的
mechanical
kee-jerk
inflexible
rigid

❸ 求机械专业英文翻译

纯手译， 个别地方可能翻译欠佳，供楼主参考。

Mechanical damage to soybean seed ring processing
Abstract
黄豆种子在加工过程中的机械损坏。
摘要

The effect of seed cleaning and handling on soybean seed germination and physical integrity were
determined with changing seed moisture content (m:c:).
黄豆种子清洁的效果以及质量方面的处理，是由种子含水量改变而决定的。

In addition, storage behavior of seed and loss of
storability caused by damage resulting from free-fall from different heights were determined.
另外， 种子存储方式以及可存储性由从不同高度下落造成的损坏所决定。

Six lots of the variety‘‘MA CS-13’’ at three different m:c:’s were passed through a vertical bucket elevator, cleaner with grader, and gravity separator and evaluated for mechanical damage, germination, and vigor index. The storage behavior of the lots, at different stages of processing, was studied by performing an accelerated aging test.
六批有三个不同含水量的 MA CS-13， 经过垂直的链斗升降机， 带有分级机的清洁机，重力分离机， 然后按照机械损伤、发芽状况以及种子活力评估。这批的存储方式在不同阶段的处理上有意的执行了一个加速老化试验。

The effect of free-fall on quality of the seed was studied by dropping six seed lots from four different heights on to cement and galvanized iron floors.
种子自由下落质量检测的效果是这样去衡量的，六个种子一组，从四个不同高度降落到水泥地和电镀铁地板上。

The vertical bucket elevator significantly decreased germination and increased splits and seed coat
damage.
垂直链斗升降机显著地减慢了发芽， 增加了种皮的裂开及损坏。

The seed lots at 12% m:c: (dry basis ), suffered less loss in seed quality than the lots at 10% or 11% m:c: The storage quality of seed, as predicted by the accelerated aging test, at 12% m.c. was also better than the lots at 10% or 11% m:c: A free-fall of soybean seed from different heights on to the cement floor resulted in greater loss in qualitythan when dropped on to the galvanized iron floor.

含水量在12%的那批（折干计算）种子，质量损失比含水量在10%和11%的种子少。 种子存储质量， 按照加速老化试验所预测的， 含水量为12%的种子比10%及11%都都要更好一些。黄豆种子从不同高度自由下落到水泥地上所造成的质量损失要比电镀铁板上的大。

2002 Elsevier Science Ltd. All rights reserved.
2002 Elsevier科技有限公司保持所有权利。

Keywords: Soybean; Processing; Mechanical damage; Germination; Moisture content
关键词： 黄豆， 处理， 机械损伤， 发芽， 含水量。

1. Introction
Soybean (Glycine max (L.) Merr.) is a protein- and oil-rich legume. It contains 40% protein and
20% oil along with calcium, iron, carotene, thiamine, and ascorbic acid. According to the ancient
written record of China, it was cultivated as early as 2000 BC (Probst and Judd, 1973). Its spread

1. 介绍
黄豆是一种富含蛋白质和油的豆类。它含有40%的蛋白质， 20%的油， 以及钙， 铁， 胡萝卜素，维生素b1， 抗坏血酸维生素C。 依照中国古代记录， 公元前2000年人们就开始种植它了。

Corresponding author. 联系作者：
Tel.: +1-204-474-6033; fax: +1-204-474-7512.
电话 传真
E-mail address: digvir [email protected] (D.S.Jayas).邮箱
0022-474X/02/$ - see front matter r 2002 Elsevier Science Ltd. All rights reserved.
PII: S 0 0 2 2 - 4 7 4 X ( 0 1 ) 0 0 0 4 0 - 6

❹ 机械英文翻译

Abstract
The graation project is the subject of radial drilling spindle hole drilling fixture design. This paper in accordance with the general steps fixture design, the design of some of the following:
Through the parts analysis, discussed the components of the machining process, process design and order the type of hair embryo. Part of the analysis through the development of mechanical parts processing line, that the choice of surface processing methods, principles and processing parts of the preparation. Fixture determine the overall plan, including processing methods, targeting programmes and positioning error analysis, clamping programme, cutting clamping force calculations.

Key words fixture design drill-processing technology.

❺ 机械英语翻译

清洗：Cleaning
脱腊：burn-on
冶炼：smelting
切割：回shearing
洗涤液：cleaning solution
涂锌 zinc coating
抛丸 ball blast

修型墁刀答：slicker
中频感应炉：intermediate frequency furnace
煮浆桶：size boiling kettle
调浆桶：size mixing kettle
光谱分析仪：optical spectrum analyzers

❻ 机械英文翻译

further
division
of
turning
into
various
types
is
carried
out
on
the
basis
of
the
mutual
situation
of
the
basic
motions
进一步的部门分类是根据基本运动（或者基本动作）共有的情况来进行的。
还是有些缺陷
毕竟对机械不够了解
希望有用

❼ 机械英语专业翻译

Deep-space exploration areas. Because of its own characteristics and functions of the robot, in humans cannot be reached, or quite dangerous environment to work, therefore, the importance of it again. For example, China launched charng-er engineering "lunar probe and key technology of China first landing on the moon is the robot, it instead of investigation and analysis, the sample.
"The robot control system is simulated in ground operation space robot scientists. "The shenzhou number seven, the robot successfully launched" in China and the application again more important. Chinese generations of space, make the eye more concentrated scientists to deep-space exploration areas.

Robots are advanced manufacturing technology and automation equipment and is representative of the "ultimate" artificial machine. It involves machinery, electronics, automatic control, computer, artificial intelligence, sensors, communication and network etc. Multiple disciplines and fields, the development of hi-tech achievements are integrated, so it's development is closely related with many subject development.

❽ 机械英文翻译

表征/单元体积（rpm/gal）这是单位
最大旁通流，
工作拉力

❾ 有关机械的英文翻译

像这种很专业的东西我真希望LZ自己懂点，不然努力又白费,让机译的拿了分还被发信息嘲笑：
1.Friction plate used for torque transferring in differential is asbesto clutch friction plate;
2.The flat belt used for transimission of vertical milling cutter is high speed circling chinlon composite belt;
3.check if oil leakage exists to worm rection gear, check the oil level,fill the oil if the level below the criterion mirror;
4.frictionclutch is completely loosen(viz. shift located in the middle perpendicular position,see（Figure 18）（a）,only recommended for loose the transimission of pressed belt temporarily），pressed belt is entire passitive without power;
5.mount the external pleura2、internal pleura3、bellow9、feeding bracket11、cover board12，funnel14、striker plate15 in sequence;
6.Build up by gear pair、gear shift fork and frictionclutch. Different speed for pressure belt and feeding belt can be realized through operate the different shift of differential;
7.The original setting of the machine is: drunken saw、amputating saw be set up according to the flat saw direction and vertical milling machine be set up according to conventional milling direction(mark out the rotating direction), unless special requirement be put forward by the customers.